Arthur_Martin AGG7536K Manuel d'utilisateur télécharger pdf (Page 13)

WARNING! Do not use knives,

scrapers or similar instruments

to clean the surface of the

glass or the rims of the burners

and the frame (if applicable).

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre of

the burner.

Removing pan supports

To keep the pan supports in the correct

position, they are put on metal pins

installed in the rear side of the hob. For

easier cleaning, pan supports can be

removed from the hob. Lift up the pan

supports keeping them in horizontal

position as shown in the graphic.

Do not lift the pan supports at

an angle, as this will put strain

on the metal pins. This can

cause damage to the pins and

cause them to break.

The shape of pan supports and the

amount of burners can be different in

other models of the appliance.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire