Arthur_Martin AKG611A3OX Manuel d'utilisateur télécharger pdf (Page 26)

Changing from natural gas to

liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the hob back.

3. Connect the appliance to the

electricity.

WARNING! Put the mains

plug into the mains socket

only if all parts are back into

their initial position. There is

a risk of injury.

4. Light the burner.

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the

minimum position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the hob back on.

Oven injector replacement

1. Remove the bottom plate of the oven

cavity to get access to the oven

burner .

2. Carefully remove from the burner the

thermocouple A. Next remove the

spark plug B.

A

B

3.

Unscrew the screw and slowly pull out

the burner.

1

2

4. Release the burner injector with a 7

mm socket spanner and replace it with

a right one.

Assemble the burner in a revers

sequence.

Replace the gas type sticker near the gas

supply ramp with the one related to the

new gas type.

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire