Arthur_Martin AKG933A7OX Manuel d'utilisateur télécharger pdf (Page 20)

2. Pull the rear end of the shelf support

away from the side wall and remove it.

Install the removed accessories in the

opposite sequence.

Catalytic cleaning

The cavity with a catalytic coating is self-

cleaning. It absorbs fat.

Before you turn on the catalytic cleaning:

• remove all the accessories and

removable shelf supports.

• clean the oven floor with warm water

and mild detergent.

• clean the inner door glass with warm

water and soft cloth.

1. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

2. Turn off the oven.

3. When the oven cools down, clean the

cavity with a wet soft cloth.

Spots or discolouration of the catalytic

coating have no effect on Catalytic

cleaning.

Cleaning the oven door

The oven door has two panels of glass

installed one behind the other. To make

the cleaning easier remove the oven door.

WARNING! The oven door can

close if you try to remove the

internal panel of glass when

the door is still assembled.

Do not lose the screws.

1. Open the door fully and hold the two

door hinges.

2. Lift and turn the levers on the two

hinges.

3. Close the oven door to the first

opening position (halfway). Then pull

forward and remove the door from its

seat.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

Arthur_Martin AKG933A7OX Manuel d'utilisateur Page 20