Arthur_Martin AKG933A7OX Manuel d'utilisateur télécharger pdf (Page 28)

A

B

3. Unscrew the screw and slowly pull out

the burner.

1

2

4. Release the burner injector with a 7

mm socket spanner and replace it with

a right one.

Assemble the burner in a revers

sequence.

Replace the gas type sticker near the gas

supply ramp with the one related to the

new gas type.

Adjusting the minimum gas

level on the oven burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the oven

functions. If there is no access to the

bypass screw dismount the control

panel before adjustment start.

3. With a thin and flat screwdriver adjust

the bypass screw A.

The model determines the position of

the bypass screw A.

A

Changing from natural gas to

liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

3. Connect the appliance to the

electricity.

Changing from liquid gas to

natural gas

1. Unscrew approximately one turn the

bypass screw position A.

2. Put the knob for the oven functions

back.

3. Connect the appliance to the

electricity.

28

1 2 ... 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire